Follow these easy steps to get your Zanussi ZBB 7266 Refrigerator up and running in no time.
Before starting, ensure that all securing tapes are removed from the appliance.
Wash the inside of the appliance using lukewarm water mixed with bicarbonate of soda (5 ml to 0.5 litre of water) to ensure cleanliness and hygiene.
Familiarize yourself with the control panel: A - Appliance button ON/OFF, B - Freezer Thermostat control knob, C - Temperature indication button, D - Temperature and function indicator, E - Function button/reset alarm, F - Fridge Thermostat control knob.
Ensure the back of the appliance is close to a wall while allowing the required ventilation gap as per the installation instructions.
After installing, leave the appliance for 2 hours before turning it on to allow the refrigerant to settle.
Plug the appliance into a power outlet. If the display is not illuminated, press button (A) to turn the appliance on.
Adjust the fridge and freezer temperatures using the thermostat control knobs. Set the fridge to between +2°C and +8°C and the freezer to approximately -18°C for optimal performance.
When first starting, set the thermostat control to a medium setting for both compartments. Adjust based on room conditions such as temperature and ventilation.
A buzzer will sound if the temperature is excessive; press button (E) to silence it. The display will remain red until proper conditions are restored.
Adjust door shelves and internal shelves as needed for storage requirements. Pull shelves in the direction of the arrows to reposition.